IC Alchemy

Projects github.com/IC-Alchemy/Mudras

Mudras Standalone

The Mudras gesture sequencer in a hand-finished wooden case, powered over USB-C. No rack required.

in development not on sale yet

The gesture engine, freed from the rack

Mudras Standalone is a hand-gesture CV sequencer and a direct CV controller. A VL53L0X time-of-flight sensor reads how far your hand is from it, and that distance becomes control voltage: quantized to a scale for melodies, or left smooth for modulation. Close to the sensor is low, farther away is high.

It runs the same firmware as Mudras, in a hand-finished wooden case powered over USB-C. Set it on a desk and patch it into a modular, a semi-modular, or anything with a 1V/oct input.

Two ways to play

Mudras Standalone picks its mode from what is patched in. There is no menu.

Direct CV. With no clock patched, your hand plays pitch live. Hold the button and the output follows your hand. Let go and it holds the last note. The gate output is high while the button is down, so it plays like a one-finger keyboard into an envelope.

Sequencer. Patch a clock or gate into the gate input and it switches over by itself. Hold the button and each pulse records your hand position as a step. Release it and the phrase loops. Overdub another pass to change steps. Pull the clock and it returns to Direct CV after three seconds.

Scales

The scale knob has eight positions, from fully counterclockwise to fully clockwise.

PositionScaleCharacter
1MajorBright and familiar. Works almost anywhere.
2Harmonic MinorDramatic, with a raised 7th.
3MixolydianMajor with a flat 7th. Open and bluesy.
4Minor PentatonicFive notes. Almost any phrase sounds musical.
5Natural MinorDark and melancholic.
6Whole ToneFloating, with no clear tonal center.
7ChromaticAll 12 semitones.
8LinearA smooth 0–3.3 V sweep with no scale. For modulation, not pitch.

Changing scale affects new hand readings. Steps already recorded keep the voltage they were captured at.

Specifications

Gesture sensorVL53L0X time-of-flight, 20–675 mm (about 2 ft), up to 60 readings a second
CV output0–3.3 V, 12-bit DAC (4096 steps), 1V/oct
GateSequencer mode: falling-edge input, transistor-protected. Direct CV mode: 3.3 V output
Loop length2, 3, 4, 8, 16, 32 or 64 steps
Scales7 quantized plus 1 linear
PowerUSB-C, 5 V bus power from a laptop, power brick or power bank
EnclosureHand-finished wood
FirmwareUpdates over USB, shared with Mudras

Dimensions, weight, wood species and price are not confirmed yet. This is a pre-production revision.

Patch ideas

  • Mono voice: CV out to a VCO’s 1V/oct input, gate out to an envelope, envelope to a VCA.
  • Slow modulation: set the scale knob to Linear and send CV out to a filter cutoff or a VCA. Move your hand slowly.
  • Instant polyrhythm: send the same clock to your main sequencer and to Mudras, then give Mudras a different loop length.